Repairs to uPVC Windows

Upvc window repair windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However, if you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, Upvc Window repair you may want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of problems including sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need open the window so that you can access the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you are happy with the fit of your window, you can tighten screws to secure them in place.

If you cannot reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how severe the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain manner or because of poor installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges, also because of wear and tear, may become displaced, which can cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it's feasible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window repairs sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. So, if you're having issues with your upvc windows, it is best to seek professional assistance as soon as you can.